- Buy 5 for £68.40 £57.00 each and save 6%
- Buy 10 for £64.20 £53.50 each and save 12%
Nature Wax C-3 is a 100% soy wax which is ideal for container candles. Super clean burning, very low shrinkage. Comes in easy-to-measure flake.
Nature Wax C-3 has good adhesion to containers, which can be improved,especially during winter months by pre-heating jars. C-3 has an exceptional scent throw with both fragrances and essential oils and a creamy white appearance with some potential to bloom (white frosting) when using dyes. Candles made with C-3 have a soft creamy appearance. C-3 Wax has a maximum fragrance load of ~7-8%.
Wicking: We recommend the use of our CL or Stabilo wicks. Woodwicks also work well in C3 wax. The table below may help to get you started and is for guidance only:
75mm Diameter: CL17/18 or Stabilo 18
70mm Diameter: CL16 or Stabilo 16
65mm Diameter: CL14 or Stabilo 14
60mm Diameter: CL12 or Stabilo 12
As ever, if you have had success with other wicks, please let us know and we will add to the table.
SLAB TESTING (HOW TO CHOOSE A WICK...)
The below process is a very quick way of finding suitable wicks for your candles. We recommend you conduct a slab test for every different blend of wax and oil that you intent to use, before making any candles :)
1. Mix the wax and your chosen oil at the required loading (typically 7-10% fragrance)
2. Pour the mixture into a large baking tray and allow to cool fully
3. Remelt the surface so that it is flat and allow to settle for at least 24 hours
4. Poke holes at ~10cm intervals using a skewer, screwdriver or similar
5. Insert various wicks that you think may be suitable (we recommend trying as many as possible)
6. Trim and light wicks in a draft free room
7. Allow to burn for 3-4 hours, observing for clubbing, excessive smoke or flame height and wick posture
8. Extinguish wicks, allow to cool and record diameter of melt pools for each wick, along with any observations on posture/clubbing/flame height
9. Remove wicks and any residue from wax, then remelt surface and repeat steps 4-8 as required (you may need pliers to remove the wicks)
10. Once complete, the wax can be used to make candles of various sizes and conduct confirmatory container tests.
If done correctly, a slab test will provide you with a long list of wick options that will allow you to wick almost any size of container.
CONTAINER SPECIFIC BURN TESTING
Slab testing will help you to identify candidate wicks for your candles, but you will still need to conduct tests in the actual container you intend on using. We call this container-specific burn testing.
We recommend that container specific burn testing be conducted in accordance with the following standards before putting candles up for sale...
EN 15493:2007 – 'Candles – specification for fire safety'
- EN 15426:2007 – 'Candles – Specification for sooting behaviour'
You may also wish to apply safety labels as outlined in the following standard...
- EN 15494:2007 – 'Candles – product safety labels'
These standards are available for purchase from The British Standards Institute and other bodies within Europe.